Absolute Humidity Calculator
Grams of water vapour per cubic metre of air from temperature and relative humidity (or vapour pressure), using a named over-water method within 0–35 °C.
Inputs
Grams of water vapour per cubic metre from temperature and relative humidity (or vapour pressure), using a named over-water method within 0–35 °C.
Enter the values and press Calculate.
Or load an example to see a worked result.
How to use this calculator
- Enter the air temperature in °C, °F or K. The method covers 0–35 °C (32–95 °F) inclusive.
- Enter the relative humidity in %, or switch to vapour pressure in hPa if you have it.
- Read the absolute humidity, the actual and saturation vapour pressures, and the sensitivity tables and curve.
How it works
Saturation vapour pressure over liquid water (Bolton 1980, as documented by UCAR NCL): es = 6.112 × exp(17.67 T ÷ (T + 243.5)) hPa, with T in °C.
Actual vapour pressure e = RH ÷ 100 × es. Treating water vapour as an ideal gas, absolute humidity = 216.7 × e ÷ (T + 273.15) g/m³.
The tool accepts 0 °C to 35 °C inclusive and says so when a temperature is outside it — nothing is extrapolated. Below freezing an over-ice formula is needed. The results are approximations and no accuracy figure is claimed, including at the endpoints.
Absolute humidity (g/m³), relative humidity (%), dew point (°C) and specific humidity (g/kg) are different quantities. No mould-risk, comfort or HVAC compliance conclusion is drawn.
Worked example
25 °C at 60 % RH. es = 6.112 × exp(17.67 × 25 ÷ 268.5) = 31.674 hPa, so e = 0.6 × 31.674 = 19.005 hPa. Absolute humidity = 216.7 × 19.005 ÷ 298.15 = 13.813 g/m³. Saturated air at 25 °C holds about 23.02 g/m³.
Frequently asked questions
Absolute or relative humidity?
Relative humidity is how close the air is to saturation, in percent. Absolute humidity is the actual mass of water vapour in a cubic metre of air. The same RH holds far more water in warm air than in cold air.
Why restrict the temperature?
The vapour-pressure formula is an approximation for liquid water. This tool offers it only over 0–35 °C rather than extrapolate it to temperatures it was not set up for.
What changes below freezing?
Below 0 °C saturation is usually referenced to ice, which needs a different formula. The tool reports that case as out of scope instead of giving an over-water figure.
Related tools
- Dew Point Calculator
- Relative Humidity Calculator
- Heat Index Calculator
- Wind Chill Calculator
- Apparent Temperature Calculator
- Cloud Base Height Calculator
Explore more in Weather & Environmental Monitoring.
Cite this tool
Zerdly. (2026). Absolute Humidity Calculator. Retrieved from https://www.zerdly.com/tools/absolute-humidity-calculator/
Tip: Enter any known values to calculate the remaining results.
Designed to run locally in your browser. Tool inputs are not intentionally stored by Zerdly unless stated otherwise.



