Filament Weight Calculator
Quick filament mass from a length, measured diameter and density — with how much a diameter or density error changes the answer.
Inputs
Quick filament mass from a length, measured diameter and density — with how much a diameter or density error changes it.
Enter the values and press Calculate.
Or load an example to see a worked result.
How to use this calculator
- Enter the filament length, for example from your slicer.
- Enter the measured diameter and the density from your filament's data sheet.
- Read the mass in grams and the sensitivity tables. For length from a mass or what's left on a spool, use the Filament Length & Weight Calculator.
How it works
mass (g) = length (m) × π × d² ÷ 4 (mm²) × ρ (g/cm³). One metre of a 1 mm² section is 1 cm³, so the units line up without conversion factors.
Diameter is squared: doubling the diameter quadruples the mass for the same length and density. The tables show the mass if your diameter were ±0.02 or ±0.05 mm different, or your density ±0.05 g/cm³.
Worked example
100 m of 1.75 mm at 1.24 g/cm³. 100 × π × 1.75² ÷ 4 × 1.24 = 298.25 g. The same 100 m of 3.5 mm filament is four times as heavy, 1,193.0 g. If the real diameter were 1.70 mm the mass would be 281.46 g, 5.6 % less. Zero length weighs nothing.
Common mistakes
- Using the nominal diameter instead of a measured one.
- Expecting the result to match a spool on the scale — it excludes the spool itself.
Frequently asked questions
Why does diameter affect mass squared?
Mass follows the cross-section area, π × d² ÷ 4. Area grows with the square of the diameter, so a 2 % thicker filament carries about 4 % more material per metre.
Does this include spool?
No. It is the filament material only. To find what is left on a spool, weigh it and subtract an empty spool's weight in the Filament Length & Weight Calculator.
When use length/weight tool?
When you need the other direction — length from a mass — or what remains on a partly used spool, or a comparison between filaments. This page is the quick mass-from-length answer.
Related tools
- Filament Length & Weight Calculator
- Filament Cost Calculator
- 3D Print Cost Calculator
- 3D Print Layer Count Calculator
- Resin Volume to Weight Calculator
- Infill Material Volume Calculator
Explore more in 3D Printing & Fabrication.
Cite this tool
Zerdly. (2026). Filament Weight Calculator. Retrieved from https://www.zerdly.com/tools/filament-weight-calculator/
Tip: Enter any known values to calculate the remaining results.
Designed to run locally in your browser. Tool inputs are not intentionally stored by Zerdly unless stated otherwise.



