Powerlifting Calculator
Score a powerlifting total against DOTS, Wilks, Wilks 2020, Glossbrenner or IPF GL points, plan attempts and openers, solve the exact plate loading for a barbell, and keep a local meet history. Every formula is reproduced from the maintainer implementation and checked against its published test values to the last digit, and each one is labelled with the version it actually is.
IPF GL points (May-2020 coefficients)
74.568
- Coefficient
- 0.130821
- Result scored
- 570.00 kg
- Bodyweight
- 93.00 kg
The coefficient is rounded to six decimal places before it is multiplied, which is how the published sheet calculates it.
These are the May-2020 coefficients, whose printed validity ended in 2023. Whether they remain the current official set has not been confirmed here, so treat this as the May-2020 version rather than today's official score.
Other scoring systems
DOTS: 362.66500-point scale
Coefficient 0.636251. Fitted for raw lifting. Bodyweights outside the fitted range are scored at the nearest edge of it.
Wilks (original): 358.07500-point scale
Coefficient 0.628190. The original formula, on a 500-point scale. Not the same as Wilks2020 and not comparable with it.
Wilks2020: 430.01600-point scale
Coefficient 0.754410. A 600-point scale, so it cannot be compared with the original Wilks. The author indicated the coefficients were not stable, and this definition does not match the tables published earlier.
Glossbrenner (continuous): 342.71500-point scale
Coefficient 0.601243. A continuous implementation averaging Schwartz-Malone and Wilks, not the federation bodyweight table. It differs from the published table at some bodyweights.
Each score stands on its own. They are never added together, and no difference between them is shown: the scales differ, so a gap between two of them would not mean anything.
Coefficients were taken from the OpenPowerlifting maintainer implementation on 2026-11-07 and are checked against its published test values to the last digit. See docs/zcalc/BLOCKERS.md for what remains unsettled.
Optional.
Runs entirely in your browser. Your input is not uploaded or stored.
How to use this calculator
- On the Score tab, pick your sex and scoring formula, then enter bodyweight and either a total or the three lifts.
- Use Compare to see the same total scored under every formula at once, which is the quickest way to see how much the choice of formula matters.
- Use Target to work backwards: enter the score you want and read the total you would need at your bodyweight.
- Use Plates to get the exact plate loading for a barbell, including whether a weight is reachable at all with the plates you have.
- Meet planner and Training hold attempt selection and estimated one-rep maxes; History keeps past entries in this browser only.
How it works
Every one of these systems works the same way: a score is the lifted total multiplied by a coefficient that depends on bodyweight and sex. What differs between them is the curve used to produce that coefficient, and the scale it is normalised to.
DOTS, Wilks and Wilks 2020 evaluate a fifth-degree polynomial in bodyweight and divide a constant by it. Glossbrenner averages Schwartz-Malone and Wilks with a piecewise linear section. IPF GL points use an exponential form with separate parameters for each sex, equipment and event.
The original Wilks formula is normalised to a 500-point scale and Wilks 2020 to 600, so the two are not interchangeable and a score under one cannot be compared with a score under the other. The tool keeps them apart for that reason.
Plate loading is solved exactly in integer grams by searching for a reachable combination, not by greedily taking the largest plate first - greedy loading misses solutions that exist.
Worked example
Worked example. A 93 kg male lifter with a 600 kg total scores 600 x 0.5933 = 355.98 DOTS. The same lifter at 83 kg with the same total would score more, because the coefficient rises as bodyweight falls - that is the entire point of a scoring formula, and it is why bodyweight must be the competition weigh-in figure rather than a rough number.
Common mistakes
- Comparing a Wilks score with a Wilks 2020 score. They are different scales - 500 and 600 points respectively - and neither converts to the other.
- Treating IPF GL points here as current official scoring. The parameters implemented are the May 2020 sheet, whose printed validity ended on 31 December 2023, and the tool labels them as the 2020 version.
- Using a bodyweight outside a formula's published range. Each formula has its own clamps, and a score outside them is not defined by its author.
- Assuming the Glossbrenner figure matches a federation's printed table for a light female lifter - see the FAQ below, where the measured difference is stated.
Tips
- Use the Compare tab before arguing about rankings: the same total can change position depending only on which formula a meet uses.
- Enter bodyweight to the same precision your federation weighs to; the coefficient curve is steep at light bodyweights.
- The plate solver tells you when a target is unreachable rather than rounding to something near it.
Frequently asked questions
Which scoring formula should I use?
Whichever one your federation uses for the meet in question - the choice is theirs, not a matter of which is most accurate. DOTS is the most widely used general-purpose formula at present. Use the Compare tab to see all of them on the same total.
Why are Wilks and Wilks 2020 kept separate?
Because they are different scales. The original is normalised to 500 points and Wilks 2020 to 600, so a score under one is not a score under the other. The maintainer's own note on Wilks 2020 also records that its definition came via the USPA directly from Robert Wilks, does not match the previously published Wilks 2020 tables, and that the coefficients were indicated as not stable. A Wilks 2020 score is a score under that definition.
Are the IPF GL points current?
No, and the tool says so where it is shown. The parameters implemented are from the May 2020 sheet, whose printed validity ended on 31 December 2023. Whether later parameters have been published could not be established from an authoritative source, so the figure is offered labelled as the 2020 version rather than as current official scoring.
Does the Glossbrenner figure match my federation's table?
For male lifters it agrees with the supplied sample rows to within 0.01%. For female lifters at light bodyweights it does not: the measured difference is about +1.05% at 40 kg, falling to +0.22% by 45.5 kg. That is because this is the continuous formula - the average of Schwartz-Malone and Wilks - rather than the federation's printed bodyweight table, which could not be obtained in full. One percent is material in competition, so the page says so where it applies.
Where do the coefficients come from?
They are transcribed from the OpenPowerlifting coefficient crate, the open-source maintainer implementation, and every formula is checked against that source's own published test values to the last digit. They were not written from memory: a web search was tried first and secondary calculator sites contradicted each other on Wilks, including on whether the numerator is 500 or 600.
Does this store my lifts anywhere?
No. History is kept in your browser's local storage on this device and is never uploaded. Clearing your browser data clears it.
Can it tell me if my attempt is legal for my federation?
No. It has no federation rulebook, so it will not warn you that an opener is below a minimum, that an increment is too small, or that a request breaks an attempt rule. It does the arithmetic; the rulebook is yours.
Related tools
- One-Rep Max Calculator
- Macro Calculator
- Protein Intake Calculator
- Body Fat Percentage Range Calculator
- Creatine Calculator
- Max Heart Rate Calculator
Explore more in Health, Fitness, Nutrition & Body.
Cite this tool
Zerdly. (2026). Powerlifting Calculator. Retrieved from https://www.zerdly.com/tools/powerlifting-calculator/
Tip: Enter any known values to calculate the remaining results.
Designed to run locally in your browser. Tool inputs are not intentionally stored by Zerdly unless stated otherwise.



