Zerdly

Flashcard and Study Pack Builder

Type your cards or import them from a CSV file with a question column and an answer column. Each A4 sheet of fronts is followed by its sheet of backs.

Choose how your printer flips the paper, long edge or short edge, and the backs are placed so each answer lands behind its own question. Every card is numbered on both sides so you can check pairs.

Downloads: PDF, Project file

Loading the builder…

How to use the Flashcard and Study Pack Builder

  1. Choose a layout: low-ink, spacious, or a question pack with a separate answer list.
  2. Add cards one by one, or import a CSV file with front and back columns.
  3. Choose cards per sheet and the duplex flip your printer uses.
  4. Turn on the flip test sheet the first time, print it double-sided and check that “Back of 1” is behind “Front 1”.
  5. Choose Create document, check the pages, then download and print double-sided at 100%.

Example

Ten general-knowledge cards, eight per A4 sheet: page 1 holds the questions, page 2 the answers mirrored for long-edge duplex, then page 3 and 4 for the last two cards.

What it does not do

  • Printers vary: print the test sheet to confirm alignment before printing a large set.
  • Cards are cut by hand along the dashed lines.
  • It does not schedule reviews or track which cards you know.
  • Up to 250 pages and 500 entries in any list.

Documents are made in your browser and are not uploaded or stored by Zerdly. Check the finished document before you use it.

Related builders

All document builders