Label and Sticker Sheet Builder

How to use the Label and Sticker Sheet Builder

1. Choose a layout: a compact sheet, a spacious sheet, or a calibrated custom grid.
2. Enter the sheet size, label size, rows and columns, then the gaps and margins in millimetres.
3. Add labels one by one, or import a CSV file and choose which columns to use.
4. If part of a sheet is used, set the label to start at (1 is top left, counting across).
5. Choose Create document and check the sheets. Print at 100% (Actual size); the calibrated layout adds a page with a 50 mm test square.

Example

Ten pantry jar labels on an A4 sheet of 21 labels (3 across, 7 down, 63.5 × 38.1 mm), starting at label 16 of a partly used sheet.

What it does not do

• Presets are described by size only. Check the measurements on your own label packet.
• Text is fitted down to a minimum size; a label whose text still does not fit is named so you can shorten it. Nothing is cut off.
• Printers vary. Print the calibration page on plain paper first.
• Up to 250 pages and 1000 entries in any list.

Documents are made in your browser and are not uploaded or stored by Zerdly. Check the finished document before you use it.