Set-out Upload File Validator
Checks a set-out point file before controller upload against controller-neutral rules you set: IDs, finite coordinates, 2D or 3D heights, codes and conflicting duplicate IDs. Findings are row-specific and nothing is swapped, rounded or transformed.
Set-out file and rules
Checks structure and values against controller-neutral rules you set. Nothing is swapped, rounded or transformed.
Paste or open the file you plan to upload, confirm the mapping and press Validate file.
How to use this calculator
- Enter the project reference (job, horizontal CRS/zone, vertical datum, units) so it is shown on the result, then paste or open the set-out file and confirm the ID, Easting, Northing, height and code columns.
- Choose 2D or 3D and your own ID and code rules from the controller's documentation — allowed characters, maximum lengths, whether every point needs a code.
- Press Validate file, review each row finding and the import preview, then deliberately choose accepted or rejected rows and a column layout, tick that you reviewed the findings, and download.
How it works
Every row is checked for a point ID, your ID character and length rules, and finite Easting and Northing values. NaN, Infinity, blanks and comma decimals are errors, never zeros.
In 2D mode a missing height is allowed; in 3D mode every point needs a finite height and a height column must be mapped. Codes are checked only against the rules you set.
A repeated ID with identical values is a warning (a double-stored point). A repeated ID with different coordinates is an error that blocks every export until the source is fixed.
An apparent Easting/Northing swap — a point that sits far from the others but would sit among them if its two values were swapped — is a warning only. The tool never swaps, rounds, reorders values or converts datums; the optional P,E,N,Z,Code layout only reorders columns.
Worked example
Seven design points. In the example file, SO2 has no RL: accepted in 2D, rejected in 3D. SO4 has RL NaN and is rejected. SO5 has 6450140.000 in the Easting column and 391240.000 in the Northing column, so it is flagged as a possible swap but still accepted unchanged. SO6 appears twice, 700 m apart, which blocks export until the file is fixed.
Frequently asked questions
Will this transform coordinates?
No. Values are exported exactly as read. There is no datum or projection conversion, no rounding and no automatic swap — the swap check only warns.
Why is height required?
Only in 3D mode, where the controller will set out levels as well as positions. For 2D set-out choose 2D and a blank height is allowed.
Does passing guarantee controller compatibility?
No. These are controller-neutral checks with your own rules. Import the file on the controller itself and check the points against independent control before setting out.
Is this official course material?
No. It is free study support mapped to surveying course levels — not official North Metropolitan TAFE content or advice. Always follow your lecturer and the official assessment brief, and check your own working.
Related tools
- Survey CSV Cleaner
- Point List Duplicate and Gap Checker
- Coordinate Import Template Generator
- Site Set-out Tolerance Report
- Datum and Projection Job Sheet
- Gridline Setout Table Generator
Explore more in Surveying, Coordinates, GIS & CAD.
Cite this tool
Zerdly. (2026). Set-out Upload File Validator. Retrieved from https://www.zerdly.com/tools/set-out-upload-file-validator/
Tip: Enter any known values to calculate the remaining results.
Designed to run locally in your browser. Tool inputs are not intentionally stored by Zerdly unless stated otherwise.



